4.3.2
Clean the tap
Make sure the container is empty and the mains
cable is unplugged
Turn the top of the
unscrewing
Remove the silicone
Remove beverage residues from the top of the tap
and the seal
Reinsert the silicone seal
Screw on the top of the tap again
4.3.3
Clean the sight glass
Make sure the container is empty and the mains
cable is unplugged
Remove rubber
stopper [1]
Pull out the sight glass
a straight line before removing it
Carefully pull out the sight
a straight line before removing it
Wet the provided brush with water and clean the
sight glass carefully.
Important To avoid damage only use the wetted
brush to clean.
Moisten the sight glass at both ends
Slide the moistened sight glass back into the
protection profile
Replace the sight glass cover and the rubber plug
User Manual heated thermo container WMF 9000 F GV
tap [1]
anti-clockwise before
seal [2]
from the top of the tap
cover [2]
upwards in
glass [3]
upwards in
Care | Weekly cleaning
1
2
21