Klarstein 10012349 Bedienungsanleitung Seite 9

(8) Press "SET"on DELAY state, you can look over the precontract time.
(9) When cut off the power supply, the machine will memorize the last operate functions automatically
in ten secends.
5.Protect functions
When the machine is on for one hour but no key-press operations occurs, it turn off automatically to
protect and the screen shows the time.
6.Setting time
(1) Time displays in a 24-hour cycle.
(2) Except boot-strap and precontract state,you can press "H" "MIN"to adjust the time.
(3) Press "H"once , it adds 1h;Press"MIN"once ,it adds 1 minute,long press "H"or "MIN", it will adds
all the time rapidly in 2～3s.
(4) Don't set time but press "DELAY" directly ,the precontract time will affirm as 00:00.
(5) When precontract time is the same as the current time, if press "DELAY", precontract time will be
delayed to the next day.(Namely the machine will beginning heating at the same time next day)
CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin, Germany
9