Klarstein 10012349 Bedienungsanleitung Seite 8

2. Key-press Instructions
(1) ON/0FF Key-press: The key-press can change the machine from working to stopping or stopping
to working, just like this: on——off——on——off----;
(2) DELAY Key-press: precontract heating; cancel clean awake and return to zero.
(3) Precontract（SET） Key-pressIt's only when be combined to "H","MIN" does the booking time
effective; In any state, you can press the key-press for a long time to see the booking time.
(4) "h" Key-press: Each time press the Key-press, the time add one hour, long press it and time adds
all the time.
(5) "min" Key-press:Each time press the Key-press, the time add one minute,long press the it and
time adds all the time.
3. Display State
(1) Earlier electrify: The screen show 00:00 and glitters all the time，but not count.
Namely: befor set the time,it glitters simultaneity and not count）
(2) Waiting state: screen show the time, lighted all the time and count, just like a electronic clock.
(3) Precontract set: press "set", at the same time press "H","MIN" till the time you want，undo the
press,and the precontract completed.
Befor set the precontract time, press"DELAY"can keep it begin with 00:00，but don't enter heat
and precontract state.
(4) Precontract:screen show the time, like a electronic clock, the lamp" "DELAY" lighted green all the
time.
(5) Heating: screen show the time ,like a electronic clock.The lamp lighted red all the time,relay has
output to make the heating pipe working.
4. Operating process
(1) Earlier electrify: screen show 00:00 and glint the middle ":" lighted all the time. Press"H /
MIN"till the time you want.If press "ON/OFF"befor setting time,it will keeping heating from 00:00
and the lamp lighted red all the time. (If press "DELAY"、"SET"first,the clock count from 00:00,but
don't access heat and precontract state.
(2) Melody the clock: You can press"H""MIN"to melody the time straightly at the earlier electrify
and waiting state.While finished, the time displayed and stop glint. .（When on operating or
booking state,it's invalid to melody the clock）
(3) Set precontract time: press "set", at the same time press "H","MIN" till the time you want.
(4) After finishing the setting ,loosen "SET", the screen change to time show,setting as follows:
a. Press"ON/OFF" to access heating state directly the lamp lighted red, and the
precontract set invalid.
b. Press the"DELAY" to precontract state, the lamp lighted green, and booking set in
effect.
c.
When loosen "SET", the precontract time will be affirmed automatically.
(5) On the precontract state, you can press"SET" to look over the precontract time.
(6)Immediate heating mode:
a. On DELAY state, the first time you press "ON/OFF", the precontract mode be
cancled and the lamp "SET" extinguished: The second time you press "ON/OFF", it
will heat immediately and the working lamp lighted.
b.
On the heating process, press "ON/OFF" to stop heating, the working lamp
extinguished and shows the time.
(7) Precontract heat:
At precontract mode, the lamp lighted green unless relieve DELAY state. Press "ON/OFF"can
cancel the precontract. While precontract you can press "SET" all the time to look over the
precontract time.
Remark: Lamp lighted green on the "DELAY" state; When precontract time is out, it heat automatically,
and lamp lighted red, while green disappear.
8