Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Getting started
Disconnecting the adapter
1. When charging is finished, the moving bars of the battery icon
stop and 'Full' is displayed on the screen.
2. Unplug the adapter from the power outlet. Disconnect the adapter
from the phone by pressing the grey tabs on both sides of the
connector and pull the connector out.
Note
• Ensure the battery is fully charged before first using the phone.
• Do not remove the battery or SIM card while charging.
• In the case the battery is not properly charged, please turn the
phone off and on using the power key, then recharge the
battery. After detaching and reattaching the battery, please
recharge the battery.
C1200 User Guide
22
Getting started
Turning your phone on and off
Turning your phone ON
1. Install a battery to the handset and connect the phone to an
external power source such as the travel adapter, cigarette lighter
adapter or hands-free car kit. Or install a charged battery pack to
the handset.
2. Press
for a few seconds until the LCD screen is turned on.
3. Depending on the status of the PIN code request setting you
may need to enter your PIN code.
Notice
Like any other radio devices, avoid any unnecessary contact
with the antenna while your phone is on.
Turning your phone OFF
1. Press
for a few seconds until the LCD screen is turned off.
C1200 User Guide
23
Werbung
Kapitel
Inhaltsverzeichnis
