Audio Connection To Stereo Equipment, Active Speaker - TechniSat DIGITRADIO 10 IR Bedienungsanleitung

The exact alignment of the telescopic antenna is often important, in particular
on the outskirts of the DAB+ reception area. On the Internet you can quickly
find the location of the nearest transmission tower by visiting
de.
Start the first scan at a window pointing in the direction of the transmission
mast. If the weather conditions are poor, DAB+ reception may be limited.
Do not touch the telescopic antenna during station playback. This could
reduce the reception and lead to sound dropouts.

6.3.2 Audio connection to stereo equipment, active speaker

> Use the analogue audio output (4) to connect the device to e.g. the AUDIO
IN on a stereo system or an AV amplifier. Use the supplied audio connection
cable to do so (a special cable may be required, depending on the AV
amplifier input).
> If your AV amplifier has an optical digital input, you can connect the
DIGITRADIO 10 IR to the amplifier via the S/PDIF optical digital output (4).
102
All manuals and user guides at all-guides.com
www.dabplus.