Abt 8T0800105 Montageanleitung Seite 18

15. Cut the cable ties -2- and -4- (fig. 6, page 17).
16. Remove the plastic wedge -5- (fig. 6, page 17).
17. Disconnect the electrical plug-in connections -7- and -8- (fig. 3, page 16).
18. Unlock the safety clamps -2- and take the washing water conduit -1- off the washing water
pump -3- for the windscreen washer system (fig. 7). Collect the leaking water in a clean bin.
19. Remove the wiring harness -2- from its fixation at the washing water tank (fig. 3, page 16).
20. Screw out the screws -1- and -3- (fig. 3, page 16).
21. Pull the washing water tank a little forward.
22. Disconnect the electrical plug-in connections -5- (fig. 3, page 16).
23. Remove the washing water conduit -6- for the head lamp cleaning and the wiring harness -4-
from its fixation at the washing water tank (fig. 3, page 16).
24. Pull out the washing water tank completely.
19.05.08 / AH
Fig. 7: Loosening of the hose coupling
MA_Kotflügeleinsätze_8T0 800 105 Seite 18 von 24