Abt 8T0800105 Montageanleitung Seite 15

5. Remove the nuts -5- of the drive shaft cover -3- and pull the cover carefully off the headless
screws (fig. 1, page 14).
6. Unscrew the screws -2- at the bottom of the wheel-arch inner panel (fig. 2).
7. Loosen the catch mechanism of the clips -3- with e.g. a little screwdriver and pull the clips off
the retaining pins (fig. 2, page 13).
8. Unlock the wheel-arch inner panel from the fender and pull it out downwards.
9. Remove the washing water tank, which is in the left fender, as follows (fig. 3, page 16):
Prepare a clean bin.
19.05.08 / AH
Fig. 2: Assembly overview wheel-arch inner panel
MA_Kotflügeleinsätze_8T0 800 105 Seite 15 von 24