Moun�Ng And Installa�On; Overview Of The Track Ligh�Ng Adapter; Alignment Of The Power Track - Derksen PHOS 15 LT Nutzungsinformation

4. Moun�ng and installa�on
• Your new LED projector must be securely installed before you start using it. A track ligh�ng adapter that meets the
specifica�ons ensures secure fi�ng.
• Make sure that your ligh�ng track is securely mounted according to the manufacturer's specifica�ons. If other project-
ors or devices are used on your track, please consider the total weight of all the devices. Informa�on about the weight
of your device is provided in the technical specifica�ons.
4.1. Overview of the track ligh�ng
adapter
① Contacts for electrical connec�on
② Locking lever for fixing into the ligh�ng track
③ Rotary switch for phase selec�on
④ Cable opening and connec�on sleeve

4.2. Alignment of the power track

The PHOS LT is intended for installa�on in power rails that
are mounted on the ceiling. The moun�ng axis of the pro-
jector and the power rail must not deviate more than
5° from the ver�cal.
The PHOS 15 LT is compa�ble with most European power tracks. Below is a selec�on of manufacturers:
Eutrac •
Global •
22 / 48
Assambly
Staff
Hoffmeister •
• Nokia
Erco
Derksen Lich�echnik
1
2
3
4