Dismantling The Projector - Derksen PHOS 15 LT Nutzungsinformation

5. The lever on the locking mechanism can now be
turned without resistance and the adapter sits firmly in
the power track.
6. Turn the selector switch to set the phase required.

4.4. Dismantling the projector

WARNING! Risk of falling parts!
A falling part can cause serious injury or death.
▶ Secure the projector and moun�ng accessories during assembly to prevent them from falling down.
1. Switch off the mains power supply to the ligh�ng track.
2. To disconnect, turn the selector switch to the 'OFF' po-
si�on.
3. Put the locking lever in its lateral home posi�on.
4. Tilt the projector, as shown in the illustra�on, un�l the
locking mechanism of the adapter releases from the
ligh�ng track and the projector can be removed effort-
lessly..
24 / 48
Se�ngs
Derksen Lich�echnik