Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Safety instruc�ons
1.1. General understanding of safety
This LED projector is safely constructed and complies with
the legal requirements for product safety. The following
safety instruc�ons are intended to help you assess remain-
ing risks in order to avoid possible damage to property or
personal injury. Consider this informa�on for use as an in-
tegral part of the product. Keep this document in a safe
place for future reference. Only pass the projector on to
others together with this document. It provides important
informa�on required for safely working with the product.
Please read the informa�on for use carefully before in-
stalling and using the LED projector. Read the 'Safety in-
struc�ons' chapter in detail and fully familiarise yourself
with it. Always observe the instruc�ons provided in the in-
forma�on for use for all work carried out. Any prevailing
regula�ons on accident preven�on and environmental pro-
tec�on, as well as any recognised technical rules governing
safe and proper work, must also be observed. Competent
handling and careful maintenance have a significant impact
on the performance and availability of your projector. In-
stalla�on and opera�ng errors, as well as inadequate main-
tenance, lead to avoidable opera�onal malfunc�ons and
breakdowns.
1.2. Intended use
PHOS 15 LT is a compact LED projector (referred to as 'pro-
jector' below) for displaying graphics and texts using light
projec�on.
•
The projector is only suitable for use on a power track
in dry areas. Water and moisture can damage the pro-
jector and result in electric shock or fire!
•
The projector is not suitable for corrosive environ-
ments (e.g. factory farming, swimming pools, tunnels,
offshore installa�ons, coastal areas up to 1 km / 0.6
miles from the sea).
•
The ambient temperature should not exceed 35°C /
95°F, otherwise the projector cannot be cooled suffi-
ciently and electronic components may fail prema-
turely.
•
The projector is only suitable for use with projec�on
mo�fs made of glass, otherwise known as 'gobos'. Do
not insert any other projec�on mo�fs or objects in the
projector! Unsuitable projec�on mo�fs can damage
the projector and cause a fire.
18 / 48
Safety instruc�ons
•
When using the projector, make sure that no people
are blinded by the bright beam of light, especially if
there is a safety risk posed by temporary glare (e.g. for
road users, people using stairs, etc.).
•
The projector must not be handled by children or per-
sons with cogni�ve impairment. Children or cog-
ni�vely impaired people must always be supervised by
a responsible person in the proximity of the projector.
•
Do not modify or dismantle the projector. Otherwise,
it may no longer meet the safety requirements. Users
may only perform the ac�ons described in this inform-
a�on for use. Repairs may only be carried out by com-
petent service technicians.
•
The manufacturer does not accept any liability for
damage caused by improper use or assembly.
1.3. Danger of electric shock
Contact with mains voltage poses a risk of fatal electrocu-
�on.
•
Only allow a qualified electrician to carry out electrical
connec�ons.
•
The projector is a Class I electrical device in accordance
with IEC 61140. Ensure that the device is properly
grounded via the electrical connec�on.
•
Make sure to observe na�onal regula�ons governing
the opera�on of electrical devices.
•
Before carrying out any electrical work, disconnect the
projector from the mains and secure it against unau-
thorised reconnec�on.
•
The device is only completely disconnected from the
mains and voltage free when the projector is discon-
nected from the power track! Disconnect the projector
from the power track before carrying out any mainten-
ance or cleaning work.
•
Only operate the device with the housing completely
closed.
•
Never pour or spray any liquids on the projector. The
projector is only suitable for indoor use in dry areas
and must never be exposed to rain or humidity.
Derksen Lich�echnik
Werbung
Inhaltsverzeichnis
