Disassembly And Disposal; Materials In Contact With Media - Sika VTY-Serie Betriebsanleitung

Disassembly and Disposal

6 Disassembly and Disposal
CAUTION
Never remove the device from a plant in operation.
 Make sure that the plant is shut down professionally.
Before disassembly
Prior to disassembly, ensure that
 the equipment is switched off and is in a safe and de-energised state.
 the equipment is depressurised and has cooled down.
Disassembly
 Remove the electrical connectors.
 Remove the flow sensor.
Disposal
Compliant with the Directives 2011/65/EU (RoHS) and 2012/19/EU (WEEE)*, the device
must be disposed of separately as electrical and electronic waste.
NO HOUSEHOLD WASTE
The device consists of various different materials. It must not be disposed of with
household waste.
 Take the device to your local recycling plant
or
 send the device back to your supplier or to SIKA.
* WEEE reg. no.: DE 25976360
7

Materials in Contact With Media

Type VTY10MA
Pipe section Brass CW617N
Turbine cage
PPE+PS
Rotor
Magnet
Shaft
Axial bearing
Radial bearing
O ring
*1) PPE+PS Noryl™ 30% glass fibre reinforced.
- 22 -
VTY10K5
*1
PPE+PS
-/-
*1
Stainless steel / hard metal
-/-
VTY15
Brass Brass CW617N
CW617N-DW
PPE+PS
*1
PPE+PS
Hard ferrite
Sapphire
PEEK Victrex™
© SIKA • Ea7900_VTY • 05/2022
VTY20 VTY25
Brass
or stainless CW617N-
steel 1.4308 DW
*1
EPDM -/-
VTY