6 Cleaning of Turbotron
•
To remove dirt from the flow sensor, you should flush it with water always in opposite direction to the
flow.
•
Attention:
The union piece of the instrument is sealed and must not be opened. When you loosen the union piece,
the fixation of the turbine system is disturbed and it will be damaged. A repair in the factory becomes
necessary!
•
Warning:
A possible blowing-out the instrument with compressed air must only be carried out in opposite direction
to the flow.
7 Shut down and disposal
•
Remove all electrical connections and dismantle the flow sensor.
•
The Turbotron unit is made of different materials (see technical data). Don't dispose the Turbotron unit
together with household waste. The official rules of your area have to be observed at disposing of the
Turbotron unit.
Cleaning
Blow-out
15
EA-2700-d-e 10/2005