Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- SAFETY INSTRUCTIONS -
Before using the device for the first time, read and observe these operating instructions and the following safety instructions for
eccentric single disc machines E50x35 Excenter and E44 Excenter and act accordingly.
Missing or modified safety devices can lead to personal injury or damage to property. Safety devices serve to protect you. Never modify
or bypass safety devices. Before connecting the device to the mains socket, check that the electrical data on the nameplate correspond
to those of the supply network. The device may only be supplied with alternating current and with a voltage that corresponds to the
specification on the type plate. If the device is unattended, it must be protected against unintentional movement. Do not approach the
machine with clothing that could become tangled e.g. scarves, neckerchiefs and loose clothing. Do not drive the machine over iron wires,
cables or pieces of rope, these parts could get tangled in the machine and cause friction.
Product liability
The operator's attention is drawn explicitly to the fact that the machines may only be used for their intended purpose. If the machines
are not used for their intended purposes, the user must accept full responsibility.
Any liability of the manufacturer is thus excluded.
Sources of risk
When the machine is stationary, the motor head must be immediately switched off to prevent damage to the floor covering.
Do not allow the supply cable to come into contact with moving parts.
Approved maintenance staff
The single-disc machine may only be serviced and repaired by per-sons with technical and legal authorization.
Cleaning agents
When using cleaning and care agents, the manufacturer's danger warnings must be followed and protective goggles and clothing must
be worn.
Only muse low-foaming, non-combustible cleaning agents which do not contain generally health-hazardous substances.
Explicit reference is made to the risks of using highly flammable, combustible, toxic, health-hazardous, corrosive or irritant substances.
Initial operation
Delivery, instruction on safety procedures, handling and maintenance and initial operation are generally carried out by our authorized
specialist.
If this is not the case, the operator is responsible for instructing machine users.
| 15
Werbung
Inhaltsverzeichnis
