Controls And Connections; Front Side - AER Domino 3 Bedienungsanleitung

3. Controls and Connections

4
1 2 3 5

3.1 Front side

channel 1/2/3/4
1) input XLR/6.3 mm jack plug combi socket
2) pad Signal source selector switch.
line: For instruments (pickups), only via jack plug.
mic: For microphones with a jack or an XLR connector.
3) gain Input level control
4) colour This switch activates the midrange contour filter. Boosts presence and slightly
cuts midrange frequencies.
5) mute
Channel mute switch
9 V Indicator light, whes 9 V phantom power is turned on.
(As a factory default setting the 9 V phantom power is only available on channel 1&3.
48 V
This indicator lights up when the 48 V phantom power for condenser microphones
is turned on (See also operation summary)
6) bass Basslevel control
7) middle Midlevel control
8) treble
Treble level control
9) eff. send Adjusts the effects send level for the corresponding channel
(the internal effect is blended).
10) effect select
ch 1/2 Rotary control for ch. 1 and 2
effect select
ch 3/4
Rotary control for ch. 3 and 4
11) aux in
Adjusts the signal level at the aux in jack sockets
13) eff. level Master level control for all internal effects
12) pre out Adjusts the signal level at the L-out ‚ ahnd R-out jacks
14) master Overall level control
15) power
This LED indicates that your amplifier is ready to use
12
6 7 8 9 10 11 12
1
16 2
15 3
14 4
13 5
12 6
7
11
8
10
9
1
16 2
15 3
14 4
13 5
12 6
7
11
8
10
9
13 14 15