Controls And Connections - AER Compact mobile Bedienungsanleitung

3. Controls and connections

1 2 3
input
high clip
low
Compact Mobile
battery-powered acoustic ampli er
IB_CPM_120718
3.1 Top side
1) input (ch. 1)
2) high/low
3) clip
4) gain
5) colour
6) bass
7) middle
8) treble
9) input (ch. 2)
10) line/mic
11) pan
12) select
13) level
14) power
15) master
16) low battery
17) charge
18) phantompower 48 V
19) aux level
12
4 5 6 7 8
gain colour bass middle treble
channel 1
2
input channel 1, 1/4" (6,35 mm) jack socket, instrument or line input
attenuator,
overload indicator
input level control
tone colour filter activation switch
bass level control
middle level control
treble level control
Input, channel 2, combo socket for ¼" (6.35 mm) jack or XLR, with
following connection options:
• XLR connector: microphone, balanced, with 48 V phantom power
• stereo jack connector: microphone, balanced, without phantom power
• mono jack connector: instrument, line, or microphone, unbalanced,
without phantom power.
signal source selector switch: line (only via jackplug)
for instruments (pickup) and other line level sources,
mic for microphones.
effect distribution control
effect select switch
level control internal effect
on/off status indicator
master level control (volume)
battery status indicator
battery charge indicator
48 V phantom power switch for microphone
aux-signal level control
9
10 3 4
input
gain
line clip
mic
high = att. off, low = att. on
6 8 11 12
bass treble pan select
efx
16 17
channel 2
low charge
battery
= not active = active
channels 1 + 2
mains & master
battery control
= off = on
phantom pwr
13 14 15
level master
power
19
18
aux level
phantom
power 48V
o
on
effects
AUX