Controls And Connections - AER AG83 Bedienungsanleitung

3. Controls and Connections

1
ground lift
1) ground lift
2) line out (top)
3) pre out (bottom)
4) power
5) clip
6) master
7) treble
8) bass
9) mic
10) mic in
11) aux
12) aux in
13) line
14) link
15) line in (std. model)
16) line in (Model with
9 V Phantom power)
17) power/ on/off
10
2
7
6
4
master treble
5
line out
pre out
3
switch that disconnects signal ground from protective earth. Useful as remedy
for hum loops. Generally, it should stay in off position (not pushed in).
preamplifier output post master and tone controls, ¼" (6.35 mm) jack
preamplifier output pre master and tone controls, ¼" (6.35 mm) jack
operation indicator
overload indicator
master level control (volume)
treble control
bass control
level control for the microphone input (mic in)
microphone input, combo socket for XLR or ¼" (6.35 mm) jack, with following
connection options:
• XLR connector: balanced, with 48 V phantom power
• mono jack connector: unbalanced, without phantom power
• stereo jack connector: balanced, without phantom power
level control for the auxiliary input (aux in)
auxiliary input, 3.5 mm jack socket
additional input for general sources with line level, e.g. CD player
Mono or stereo jack plugs (3.5 mm) can be used.
level control for the line input (line in)
XLR output for loop-through, directly connected to line in XLR socket
line input, combo socket for XLR or ¼" (6.35 mm) jack, with following
connection options:
• XLR connector: Balanced
• mono jack connector: Unbalanced
• stereo jack connector: Balanced
line input, combo socket for XLR or ¼" (6.35 mm) jack, with following
connection options:
• XLR connector: Balanced, without phantom power
• mono jack connector: unbalanced, without phantom power
• stereo jack connector: unbalanced, with 9 V phantom power on
"ring" terminal of jack plug
Mains power switch. On/off switch of the AG83 Active Monitor. (not shown)
8 9 10 11
Push
bass mic
mic in
XLR = P48
Made in Germany
12 13 14
aux line
link
aux in
power
on
o
15 16
Push
line in