Installation; Dimensions Of The Saunum Base / Base Short Models - Saunum BASE Bedienungs- Und Installationsanleitung

INSTALLATION

NB! Read the Safety Information before
beginning installation (see pp 10–11)!
The Device is installed on the wall of the
steam room or behind the inner lining (if
the device is integrated into the wall, the
lining boards must be secured to the sheet
metal face of the air duct with weather-
board clamps) (see Figures 1, 1A, 1B, 1C, 1D,
1E and 2, 2A, 2B and 2C on the following
pages).
The air outlet of may not be obstructed and
sauna users must keep all body parts (feet,
arms, legs, hands, etc.) at least 50 cm away
from the fan.
The discharged air flow must be able to
spread freely throughout the steam room.
Cable opening
12
106 mm
Figure 1
Dimensions of the Saunum
BASE / BASE Short models.
SIDE VIEW
BOTTOM VIEW
139 mm
226 mm
200 mm
FRONT VIEW REAR VIEW
400 mm
437 mm
300 mm
250 mm
6,5 mm
13