WATERPROOF DIVING ULTIMA DRY GLOVE SYSTEM Gebrauchsanweisung Seite 9

2. Place the Silicone seal inside the suit ring
and fold the lower end of the seal over the
suit ring. (It might be a good idea to use a
new Silicone seal)
3. The ridge on the seal should be placed in
the second groove as standard.
(In some cases it can be placed in the next
groove to achieve better sealing)
Add lubricant on this surface
4. Add some waterbased lubricant on the
Silicone section that slides into the suit arm.
Make sure the Silicone doesn't wrinkle when
pushing it into the suit.