WATERPROOF DIVING ULTIMA DRY GLOVE SYSTEM Gebrauchsanweisung Seite 14

3. Pull the drysuit Latex seal over the Silicone
seal and onto the suit ring. Check the seal is
centered. Mount the o-ring into the deep
groove.
4. Fold back the remaining part
of the latex seal as shown in the image.
Cover ring
Neoprene cuff
5. Pull the drysuit Neoprene cuff to cover the
seals, leaving a gap of approximately 4mm and
mount the cover ring as shown.
Watch the instruction video on www.waterproof.eu