WATERPROOF DIVING ULTIMA DRY GLOVE SYSTEM Gebrauchsanweisung Seite 6

MOUNTING A SILICONE OR LATEX DRY GLOVE TO THE GLOVE RING
1. Put the glove ring in the glove and turn it as
shown in the image. Adjust the overlap to achieve
the correct length of the glove.
2. Mount the o-ring in the groove.
3. Fold the edge back over the o-ring and pull to
adjust the overlap.
Mount the cover ring and adjust it to t in the
groove next to the o-ring.
Watch the instruction video on www.waterproof.eu