WATERPROOF DIVING ULTIMA DRY GLOVE SYSTEM Gebrauchsanweisung Seite 8

MOUNTING ULTIMA IN A WATERPROOF SUIT OR A SUIT
WITH SI TECH QCS OVAL SYSTEM.
The Ultima Dry Glove System is designed to t directly in to the Waterproof ISS system or SI TECH QCS
oval system. This means the only thing you need to do is to remove the stiff plastic ring from the suit
arm and replace it with the Ultima suit ring. IMPORTANT! Do not remove the softer PU-ring that is
glued into the suit. This ring is the 'docking station' for the Ultima suit ring.
Suit arm with
mounted PU-ring
1. Remove the stiff oval ring from the suit arm. Use
the tool if is too hard by hand. Check the seal for
damage.
Watch the instruction video on www.waterproof.eu
Wrist seal
Ultima
suit ring
Glove ring