WATERPROOF DIVING ULTIMA DRY GLOVE SYSTEM Gebrauchsanweisung Seite 7

MOUNTING A PVC/FABRIC TYPE GLOVE TO THE GLOVE RING
1. Place the o-ring inside the glove opening to the
desired length of the glove, and fold the edge
inwards.
2. Open the glove and o-ring by pulling with both
hands rmly and mount it onto the glove ring.
It is easier to mount the glove if the glove ring is
mounted on the suit ring. Ask a friend to hold the
glove ring during installation.
Cover ring
O-ring
3. Check the glove is correctly mounted and is the
desired length.
Glove
4. Mount the cover ring.
Glove ring
Watch the instruction video on www.waterproof.eu