eta 002895070 Bedienungsanleitung Seite 18

EN
– Use this appliance only for the purpose for which it was designed as specifi ed in this
user's manual. Never use the appliance for any other purpose.
– WARNING: There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this anguage mutation.
– The manufacturer takes no responsibility for damages and injuries caused by the incorrect
use of supplementary machines and accessories (e.g. ruining of foods, injury, cuts)
and takes no responsibility arising from the warranty on the appliance in the case that the
above safety notices were not followed.
– Read and follow the safety instructions in the manual to the optional attachment
and food processor.
– Can be used attachment for garlic peeler only with disc grating attachment
ETA002895030 and gearbox ETA002899999 (not included).
II. DESCRIPTION OF THE ACCESSORIES (fig. 1)
M13 – Drive
M14 – Blender
III. PREPARATION AND USE
Remove all packaging materials, take out the all accessories. Remove all adhesive foils,
stickers or paper from the accessories. Before first use clean the parts that will come in
contact with food using warm water with detergent, thoroughly rinse with clean water and
wipe dry, if necessary allow to dry.
Assembly
Assemble the garlic peeler according to the intended use and mount it on the main motor
unit – see Figures 2 and 3. Apply reverse procedure to disassemble the garlic peeler and to
remove it from the motor unit head.
ATTENTION: Check that the gearbox is properly attached prior to use. Turn the food processor
on and check that the screw is turning. If no, turn the food processor off.
Attention
M15 – Lock part
M16 – Container
18 / 39