Hama RC 610 Bedienungsanleitung Seite 7

6. Getting started
1. After the batteries are installed, the LCD will turn on for 2 seconds. The
clock will automatically search the radio signal. It takes about 3-5 minutes
to finish this process.
2. If the radio signal is received, the date & time will be set automatically
with radio control signal icon [
3. If the clock fails to receive the time signal, the radio control signal icon
[ ] turns off. Then user have to set the time manually.
7. Slide switch (DATE SET/ TIME SET/ ALARM SET/— LOCK)
1. Slide button to DATE SET, press ▲ or ▼ key to set date and month
and year.
2. Slide button to TIME SET, press ▲ or ▼ key to set hour and minutes.
3. Slide button to ALARM SET, press ▲ or ▼ key to set hour and minutes
of alarm time.
4. Slide button to — position, to lock all the settings.
Note
During any setting mode, keep pressing and holding ▲ or ▼ key for fast setting.
8. 12/24 HOUR TIME DISPLAY
Press ▲ key once to switch the time display between 12 and 24 hours format.
9. Calendar setting
1. To change the weekday display from one language to another language, press and hold the ▼ key
for 3 seconds and the display will be scrolled as below:
4
All manuals and user guides at all-guides.com
] turns on.