Konig Electronic SEC-ALARM200 Anleitung Seite 2

QUICK SETUP GUIDE
Functions include:
Alert – Advises you to what is happening around the house
Alarm – Protects your home / assets while you are away
Communication – Calls you during an emergency, you can also call in to perform a variety
of operations
This Quick Guide will show you how to setup the system and use basic functions. It is
strongly recommended that you refer to the User's Instructions for full illustrations on how
the system should be installed and operated.
Installation of the Control Panel
1. Plug in the adapter to
a wall socket and the
other end should be
connected to the socket
on the Control Panel
marked "DC 12 V". You
should hear 3 beeps.
2. Remove the screw on
the battery cover and
insert 4 pcs of AAA
batteries into the battery
holder. Tighten
screw afterwards.
3. Plug in a phone line from
the "LINE" socket to the
phone outlet on the wall.
4. If you want to connect a
telephone to the Control
Panel, the phone can be
plugged into the socket
marked "PHONE" on the
Control Panel.
ENGLISH
the
2