Use And Maintenance; Mode Selection: Roller Or Tilting Mode - SOMFY RU Basic 28 WF RTS Li-ion II Anleitung

RU Basic 28 WF RTS Li-ion II
g The motorised product briefly moves
up and down, the control point
commands are enabled. Green LED
blinks 5 times.

3.USE AND MAINTENANCE

NOTICE
This drive does not require any maintenance operations.

3.1.Mode selection: Roller or Tilting Mode

The drives are designed to work in 2 modes: Tilting mode or Roller mode.
This feature allows the drive to be set according to the type of application.
NOTICE
The drive is set (by default) to work in Roller mode.
1] Move the motorised product away from
the end limits.
2] Simultaneously press and hold the Up and
Down buttons until the motorised
product briefly moves up and down.
3] Press and hold the my and Down buttons
simultaneously
product briefly moves up and down to
change from Roller mode to Tilting mode.
g Green LED blinks twice to indicate that
the drive is in Roller mode or three
times to indicate that the motor is in
Tilting mode.
©
Copyright 2021 SOMFY ACTIVITES SA. All rights reserved.
until the motorised
1]
2] 3]
EN
15