Inhaltsverzeichnis
Werbung
ASSEMBLING AND ADJUSTING THE LENGTH OF STRAPS
If you are not sure how to assemble, shorten or lengthen the watch straps,
please contact your specialist SINN retailer directly or one of our watchmakers
in customer service in Frankfurt am Main. We would also be happy to help you
over the telephone.
Silicone strap with folding clasp with strap-length quick adjustment
Step 1:
Fitting the folding clasp
We recommend that you completely fit the folding claps before shortening the
silicone strap. Doing so will enable you to make a better assessment of whether
you need to shorten the silicone strap.
Open the retaining bar on the unfolded folding clasp and guide the silicone
strap half with the stud
at position
B
the guide rails of the folding clasp. Position the silicone strap so that you can
move it at least one position forward and one position back (standard position,
see diagram). To make the silicone strap tighter, move it one position to the left.
To make the silicone strap looser, move it one position to the right.
from above via the insertion slot into
2
Bring the silicone strap to the standard
position and press the retainer bar into the
appropriate free spindle on the silicone
strap. Check whether the retainer bar is
securely locked into place. Try on the fully
fitted silicone strap on your wrist.
B
Standard position
Insertion slot
2
1
B
23
Werbung
Inhaltsverzeichnis
