4. To reassemble proceed in reverse order.
5. Check that the groove of the hinge bracket is positioned properly in its guide.
6. After reassembling the door close the safety catch carefully.
7. If the safety catch is not closed properly, you will damage the hinges when
closing the door.
7.6 Removing / installing of the side rack(s)
❖ You can remove the side racks to facilitate the cleaning of the oven cavity
(especially the side panels).
Remove all accessories such as the grilling grate, drip tray, etc. before you
remove the side racks.
NOTICE! Only carry out the removal of the side racks with utmost care,
otherwise you may damage the enamel.
WARNING! Any damage caused by the improper removal or
installation of the side racks is not covered by the guarantee.
1. Press the hook (A) of the side rack slightly
downwards (s. fig. on the right, arrow).
2. Swivel the side rack inwards at an angle of
approx. 45 degrees (s. fig on the right, arrow).
H
OW TO REMOVE THE SIDE RACKS
~
97
~