Technical Data; Noise/Vibration Information - Bosch GOF 2000 CE Professional Originalbetriebsanleitung

33 Router compass/guide-rail adapter*
34 Router compass handle*
35 Wing bolt for coarse adjustment of
router compass (2x)*
36 Wing bolt for fine adjustment of
router compass (1x)*
37 Fine-adjustment knob for router compass*
38 Centring screw*
39 Base spacer
(included in the "router compass" set)*
40 Guide rail*
41 Guide bushing adapter
42 Fastening screw for guide bushing adapter
(2x)
43 Release lever for guide bushing adapter
44 Guide bushing*
45 Fastening screw for guide plate (4x)
46 Centring pin*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools

Technical Data

Plunge router
Article number
Rated power input
No-load speed
Speed preselection
Constant electronic
control
Connection for dust ex-
traction
Tool holder
Plunge depth
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.

Noise/Vibration Information

Measured values determined according to
EN 60745 (chip board).
Typically the A-weighted noise levels of the
product are: Sound pressure level 89 dB(A);
Sound power level 100 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
tainty K =1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
English | 21
GOF 2000 CE
Professional
3 601 F49 ...
W 2000
-1
min 8000
– 21000
mm 8 – 12.7
inch ¼ – ½
mm 65
kg 6.0
/II
2
=5.0 m/s , Uncer-
h
1 609 929 N94 | (3.9.08)