Product Description; Assembly And Start-Up - Oase Fountain Ring LED Set Inbetriebnahme

Safe operation
• Do not look directly into the light source.
• Do not use the unit, if electrical lines or the housing are damaged.
• A damaged connection cable cannot be replaced. Dispose of the unit.
• Do not carry or pull the unit by its power cable.
• Route lines in such a way that they are protected from damage and do not present a tripping
hazard.
• Should problems occur, please contact the authorised customer service or OASE.

Product Description

1 LED ring
2 Transformer

Assembly and start-up

 A
• Assembly on an OASE copper bowl
 B
• Assembly on an OASE cube
 C, D
• Position the transformer at least 2 m from the edge of the pond.
• Connect the connection cable of the spotlight to the socket on the transformer and hand-
tighten the union nut.
Switching on the unit: Plug the power plug of the transformer into the socket. The unit switches
on immediately.
Switching off the unit: Disconnect the transformer power plug.
8
LED0016