Herunterladen Inhalt Inhalt Diese Seite drucken

BestMatic COM-125625.5 Bedienungsanleitung Seite 14

Kühl/gefrierkombination
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

when it is in the right position), and then assemble the lower hinge shaft to the shaft hole position of the lower
hinge panel. Tighten the nut at the bottom with a wrench, and the lower hinge shaft still faces upward. Screw
the low front foot to the corresponding lower hinge panel. Install the three screws fixing the lower hinge.
Fig.6
Let the shaft hole at the bottom of the left side of the freezing door body be installed on the shaft of the lower
hinge, and the door body will be initially fixed. Take the middle hinge to the left position in the middle of the
appliance, and take two screws to fix the middle hinge.
Fig.7-8
Take the refrigerator door body and install the shaft hole at the bottom of the left side of the door body on the
shaft of the middle hinge. Take the upper hinge and fix it with screws. Install the upper hinge cover and fix it
with screws.
TECHNICAL SPECIFICATIONS
Rated voltage:
Rated current:
Rated frequency:
Lamp power:
Defrost power:
Climate class:
Refrigerant:
Protection against electrical shock:
Insulation blowing gas:
Climate class:
-
Extended temperate (SN): 'this refrigerating appliance is intended to be used at ambient temperatures
ranging from 10°C to 32 °C';
-
Temperate(N): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 32 °C';
-
Subtropical (ST): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 38 °C';
-
Tropical(T): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C
to 43 °C';
Note: More data information, please scan the QR code on the energy label.
TROUBLESHOOTING
Symptom
The appliance does not
work.
The appliance makes a
lot of noise.
The appliance doesn't
cool enough.
There are smells in the
appliance.
Cause
There is no power supply.
The fuse doesn't work.
The appliance is too close to the wall,
or is not stable, or the accessories
inside the refrigerator are placed in
wrong position.
The door is too often opened or was
left opened for a long time.
The refrigerator is too close to the
wall.
The refrigerator is too full.
Food becomes obsolete inside the
refrigerator.
The inside of the device needs to
be cleaned.
220-240V~
1.0A
50Hz
0.5W
197W
SN/N/ST/T
R600a(46g)
I
CYCLOPENTANE
Verify that the appliance is connected to the
plug.
Replace the fuse.
Stabilize the base of the refrigerator by
adjusting the position of feet, take away the
device off the wall, place correctly the
accessories inside the refrigerator.
Close the door and do not open it too much
frequently.
Take away the device off the wall for the
ventilation.
Remove food of the device.
Throw away the obsolete food and wrap
the other.
Clean the inside of the refrigerator.
- 13 -
Solution

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Com-125625.6

Inhaltsverzeichnis