BestMatic COM-125625.5 Bedienungsanleitung Seite 13

DOOR REVERSE
Users can change the direction of opening according to one's own needs. The concrete operating sequence is as
follows: (The pictures below are for the guideline to reverse the door. The appearance of the appliance may be
different from the product you purchased.)
1
5
Fig.1
Remove the upper hinge cover on the top of the right side of the appliance, and then remove the three screws
fixing the upper hinge. Put the upper hinge cover and the upper hinge aside first.
Fig.2
Take down the refrigerator door body, put it aside first. Remove the two screws fixing the middle hinge in the
middle of the appliance, take down the middle hinge and put it aside. Take down the freezing door body and
put it aside.
Fig.3
Remove the three screws fixing the lower hinge at the bottom of the right side of the appliance, remove the
lower hinge, and then screw off the low front foot at the bottom of the hinge. At the same time, use a wrench
to remove the nut fixing the hinge shaft, and then screw down the high front foot at the bottom of the left side
of the appliance by hand.
Fig.4-5
Install the unscrewed high front foot to the hole at the symmetrical bottom of the right side of the appliance,
and tighten the high front foot. Turn the removed lower hinge 180 degrees (symmetrical with the mirror image
2
6
- 12 -
3
7
4
8