Using The Fiber Cable Adapter - Olympus PT-045 Bedienungsanleitung

Using the fiber cable adapter

The fiber cable adapter is required when connecting the separately
available UFL-1 underwater flash to the Case using an underwater optical
fiber cable (optional: PTCB-E02).
How to install
1 Remove the white diffuser while pulling it up, then attach the optical
fiber cable adapter to the diffuser shown in the figure below.
2 Put the underwater optical fiber cable plug all the way into the optical
fiber cable (optional: PTCB-E02) insertion slot.
Remove the underwater optical fiber cable and attach the white diffuser
when you do not use it while taking picture.
En
EN 13