Cleaning/Care; Disposal; Technical Specifications - Sanitas SMA 36 Gebrauchsanweisung

4. Cleaning/care

Before cleaning the power unit, always unplug it from the socket outlet!
– Clean the instrument with a slightly moistened cloth. You can also
moisten the cloth with mild soap suds to remove more stubborn dirt.
– If necessary, for reasons of hygiene, the attachments can be cleaned with
a cloth or brush moistened with alcohol. Dry them carefully afterwards.
– Do not drop the instrument.
– Make sure that no water enters the instrument. But if this should happen,
do not use the instrument again until it is completely dry.
– Do not use chemical detergent or scouring agents for cleaning.
– Never immerse the instrument or plug-in power unit in water or other
liquids.

5. Disposal

For environmental reasons, do not dispose of the device in the house-
hold waste at the end of its useful life. Dispose of the unit at a suitable
local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsible for
waste disposal.

6. Technical specifications

Supply
Input:
Output:
Average active efficiency:
No-load power consumption: ≤ 0.09 W
Speed:
Device dimensions:
Weight:
Subject to technical changes
100-240 V~; 50/60 Hz 0.5 A
30.0 V 0.25 A; 7.5 W
≥ 80.3%
3.800 - 4.600 +/- 15%
15.2 x 3.7x 3.7 cm
Mains part: approx. 93 g
Device: approx. 100 g
17