Sanitas SMA 36 Gebrauchsanweisung Seite 16

When filing, always work from the outside of the nail towards the tip!
Always check results regularly during treatment. As soon as the application
becomes unpleasant, stop the treatment.
3 – Sapphire cone
Removal of dry skin or calluses from the soles of
the feet and from the heels and for manicuring
the nails.
4 – Felt cone
Smoothing and polishing the edge of the nail
after filing as well as for cleaning the nail surface.
Always polish in circular movements and do not
allow the felt cone to rest in one place, otherwise
friction could cause heat to develop.
5 – Sapphire callus rasp
For rapid removal of stubborn calluses and hard
skin on the soles of feet and heels This attach-
ment can be used on large areas.
6 – Cylindrical milling cutter
Grinding of lignified foot nail surfaces as well as
smoothing of these. For this purpose, apply the
milling cutter horizontally to the nail surface and
remove the unwanted layer of nail using slow
circular movements.
7 – Flame milling cutter
For removing ingrowing nails. Carefully guide
the flame cutter up to the part to be treated and
remove parts of the nail as necessary.
16