Preparation; Application; General - Sanitas SMA 36 Gebrauchsanweisung

– The instrument must not be operated continuously for longer than
20 minutes. After this time, wait an interval of at least 15 minutes to
prevent the motor from overheating.
– Ensure your hands are dry before handling either the instrument or
the plug-in power unit.
– Do not pull on the power cord or instrument to unplug the plug-in
power unit from the socket outlet.
– The plug-in power unit must be operated only from a power supply
as specified on it.
– The appliance should only be operated with the power unit provided.
– After use, before cleaning and changing any accessory parts, the
power unit should always be disconnected.

2. Preparation

This manicure and pedicure instrument is equipped with high-quality at-
tachments. The basic version includes 7 attachments with long-life sapphire
coating or polishing felt.
Together with the 2-level speed control and clockwise/anticlockwise ope-
ration, this ensures a professional pedicure and manicure that would other-
wise only be possible at a podiatrist.

3. Application

3.1 General

– This instrument is intended only for the treatment of hands (manicure)
and feet (pedicure).
– Make sure that the device is switched off beforehand.
– Select an attachment and push it onto the instrument spindle using a
slight pressure. To remove: pull the attachment and instrument apart in
the axial direction (straight).
– Switch the device on by moving the slide switch down (anticlockwise,
LED red) or up (clockwise, LED green).
– You can choose between two speed settings („Hi" and „Lo"). To set the
desired speed setting, push the switch up („Hi") or down („Lo").
– All file and cutting attachments are coated with a sapphire grain.
This guarantees extremely long life and almost guarantees freedom from
wear.
14