EN
18
OPERATING INSTRUCTIONS
Step 1
Add water by manual: Open the lid, take out of the ice basket and fill the water
reservoir with water.
Note: Make sure the water is not over the bottom of the ice collecting tray.
Add water by auto filling: please connect the pipe at back of the unit to the water tap
directly.
Note: The maximum permissible inlet water pressure: 0.6 MPa. The minimum permissible
inlet water pressure: 0.14M Pa.
Step 2
Connect to the power
Step 3
Press the ICE button to turn unit on. The ice maker begins to work.
Note: For the first three cycles, the ice may be small and irregular in size, or even no ice.
It lights up when the water in water tank is not
enough.
Press it to start the ice making.