Draining The Water Tank; Cleaning The Filter Drawer - Beko DPU 8306 GXE Bedienungsanleitung

Maintenance and cleaning
C
Clean metal surfaces of the sensors 4
times a year.
C
Do not use metal tools when cleaning
metal surfaces of the sensors.
A
CAUTION: Never use solvents, cleaning
agents or similar substances for cleaning
due to the risk of fire and explosion!

7.3 Draining the water tank

Dampness of the laundry is removed and
condensed during drying process and the water
that arise accumulates in the water tank. Drain the
water tank after each drying cycle.
A
CAUTION: Condensed water is not
drinkable!
A
CAUTION: Never remove the water tank
when the program is running!
If you forget to drain the water tank, the machine
will stop during the subsequent drying cycles when
the water tank is full and the Water Tank warning
symbol will flash. If this is the case, drain the water
tank and press Start / Pause button to resume
the drying cycle.
To drain the water tank:
60 / 64 EN
1. Pull the drawer and remove the water tank
carefully.
2. Drain the water in the tank.
3. If there is lint accumulation in the funnel of
the water tank, clean it under running water.
4. Place the water tank into its seat.

7.4 Cleaning the filter drawer

Lint and fiber that could not be captured by the
lint filter are blocked in the filter drawer behind the
kick plate. Filter Drawer Cleaning warning light will
light up maximum at every 3 drying cycles as a
reminder.
There is a two-level filter in the filter drawer.
Te first level is the filter drawer sponge and the
second level is the filter cloth.
Dryer / User Manual