Installation; Appropriate Installation Location; Removing The Transportation Safety Assembly; Under Counter Installation - Beko DPU 8306 GXE Bedienungsanleitung

Installation

3
Refer to the nearest Authorized Service Agent for
installation of the product. To make the product
ready for use, make sure that the electricity
and water drainage systems are appropriate by
reading the information/instructions given in the
user manual before calling the Authorized Service
Agent. If they are not, call a qualified technician
and plumber to have any necessary arrangements
carried out.
C
Preparation of the product's location
as well as the electrical, clean water
and waste water installations is under
customer's responsibility.
B
CAUTION: Installation and electrical
connections of the product must be
performed by the Authorized Service
Agent. Manufacturer shall not be held
liable for damages that may arise from
procedures carried out by unauthorized
persons.
A
CAUTION: Prior to installation, visually
check if the product has any defects on
it. If so, do not have it installed. Damaged
products cause risks for your safety.
A
CAUTION: Let your dryer wait for 12
hours before starting to use it.

3.1 Appropriate installation location

Install the product on a stable and level
ƒ
surface.
Dryer is heavy. Do not move it by yourself.
ƒ
Operate your product in a well ventilated,
ƒ
dust-free environment.
ƒ Do not block the air ducts in front of and
under the product with materials such as long
pile rugs, wooden blocks and bands.
Do not install the product behind a door with
ƒ
a lock, sliding door or a hinged door which
can strike the product.
ƒ Once the product is installed, it should stay at
the same place where its connections have
been made. When installing the product,
make sure that the rear wall of it does not
touch anywhere (tap, socket, etc.). Also pay
Dryer / User Manual
attention to select an installation location
which you will not be required to change
afterwards.
ƒ Place the product at least 1.5 cm away from
the edges of other furniture.
B
Do not place the product
CAUTION:
on top of the power cord.
3.2 Removing the transportation
safety assembly
A
CAUTION: Remove the transportation
safety assembly before using the product
for the first time.
1. Open the loading door.
2. There is a nylon bag inside the drum that
contains a piece of styrofoam. Hold it from its
section marked with XX XX.
3. Pull the nylon towards yourself and remove
the transportation safety assembly.
A
Check that no part of
CAUTION:
the transportation safety assembly
remains inside the drum.

3.3 Under counter installation

This product can be installed under a counter
ƒ
if the height of the counter is sufficient.
A
While using the under
CAUTION:
counter dryer, never operate
the dryer without under counter
installation part.
Dryer Depth
Stock number
of under-bench 2979700100
installation part
60 cm 54 cm
2973600100
43 / 64 EN