Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning; Lint Filter / Loading Door Inner Surface; Cleaning The Sensors - Beko DPU 8306 GXE Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Maintenance and cleaning

7
Service life of the product extends and frequently
faced problems decrease if cleaned at regular
intervals.
B
CAUTION: Unplug the product from
the mains during any maintenance and
cleaning works (control panel, body, etc.).
7.1 Lint Filter / Loading Door Inner
Surface
Lint and fiber released from the laundry to the air
during the drying cycle are collected in the Lint
Filter.
C
Such fiber and lint are generally formed
during wearing and washing.
A
CAUTION: Always clean the lint filter and
the inner surfaces of the loading door after
each drying process.
C
You can clean the lint filter housing with a
vacuum cleaner.
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it up and open
the lint filter.
3. Clean lint, fiber, and cotton raveling by hand or
with a soft piece of cloth.
4. Close the lint filter and place it back into its
housing.
Dryer / User Manual
C
A layer can build up on the filter pores that
can cause clogging of the filter after using
the machine for a while. Wash the lint filter
with warm water to remove the layer that
builds up on the lint filter surface. Dry the
lint filter completely before reinstalling it.
C
Clean the entire inner surface of the
loading door and loading door gasket.

7.2 Cleaning the sensors

There are dampness sensors in the machine that
detect whether the laundry is dry or not.
To clean the sensors:
1. Open the loading door of the machine.
2. Allow the machine to cool down if it is still hot
due to the drying process.
3. Wipe the metal surfaces of the sensor with
a soft cloth, dampened with vinegar and dry
them.
59 / 64 EN

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis