Easy Use; Preparing The Machine; Programme Selection; Auxiliary Functions - Beko DPU 8306 GXE Bedienungsanleitung

Easy use

6

6.1 Preparing the machine

1. Plug in the machine.
2. Place the laundry into the machine.
3. Press On / Off button.

6.2 Programme selection

1. Decide the appropriate programme from the
table including drying levels.
2. Select the desired programme using
Programme Selection knob.

6.3 Auxiliary functions

Machine will give an audio warning when the
programme is completed. If you do not want
the machine to give an audio warning, press
the Volume button repeatedly until an "x" sign
appears on the display. Use the same button to
adjust the volume.
Used to adjust the required dryness level.
More drying is performed compared to default
settings when "+" sign appears and less drying
is performed when "-" sign appears. Programme
duration can vary depending on selection.
You can use Anti-creasing function to prevent
laundry from creasing if you will not immediately
take the laundry out after the program has come
to an end. This function rotates the laundry every
240 seconds for 2 hours to prevent creasing.
In the first display image below, anti-creasing is
activated but programme is still running. Drying
cycle is completed and Anti-creasing step has
started in the second display image.

6.4 Starting programme

Press Start / Pause / Cancel button to start the
programme.
Start / Pause symbol will light up to indicate that
the programme has started and ":" symbol in the
middle of remaining time will continue flashing.

6.5 End of programme

Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-up
indicator and "End" label appears on the display
when the programme comes to an end. Loading
door can be opened and the machine becomes
58 / 64 EN
ready for a second cycle.
Press On / Off button to switch the machine off.

6.6 Cancelling the programme

If you want to stop drying and cancel the
programme for any reason after the machine
has started, press and hold the Start / Pause /
Cancel button for 3 seconds. Lint Filter Cleaning
and Water Tank warning symbols light up and
"End" label appears on the display as a reminder
at the end of this period.

6.7 Child-proof Lock

Machine is equipped with a Child-proof Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On / Off button on the control
panel are disabled when the Child-proof Lock is
active.
To activate the childproof lock:
Press Audio Warning and Anti-Creasing buttons
simultaneously for 3 seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, Child-proof Lock should be
deactivated. To deactivate the childproof lock:
Press Audio Warning and Anti-Creasing buttons
simultaneously for 3 seconds.
C
Lock symbol will appear on the display
when Child-proof Lock is activated.
C
Child-proof lock is deactivated when the
machine is switched off and on with On /
Off button.
When the Child-proof Lock is activated:
Display symbols will not change even if the
ƒ
position of programme selection knob is
changed while the machine is running or in
halt.
If the child-proof lock is deactivated after
ƒ
changing the position of programme
selection knob while your machine is running,
your machine stops and new programme
information is displayed.
Dryer / User Manual