Cancelling The Programme; End Of Programme - Beko DPU 8306 GXE Bedienungsanleitung

Operating the product
CAUTION: Do not touch the inner surface
of the drum when adding or taking out
laundry while a programme is running.
Surfaces of the drum are hot.

5.16 Cancelling the programme

If you want to stop drying and cancel the
programme for any reason after the machine
has started, press and hold the Start / Pause /
Cancel button for 3 seconds. Lint Filter Cleaning
and Water Tank warning symbols light up and
"End" label appears on the display as a reminder
at the end of this period.
A
CAUTION: Since inside of the machine will
be excessively hot, activate the ventilation
program to cool it down when you cancel
the program while machine is running.
C
Machine will stop if you turn the
Programme Selection knob while
it is operating. In this case, currently
running programme is aborted and new
programme information appears on the
display.
Dryer / User Manual

5.17 End of programme

Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-up
indicator and "End" label appears on the display
when the programme comes to an end. Loading
door can be opened and the machine becomes
ready for a second cycle.
Press On / Off button to switch the machine off.
C
If Anti-creasing function is activated and
laundry is not taken out of the machine
at the end of programme, 2-hour Anti-
creasing programme will be activated.
C
Clean the lint filter after each drying. (See
"Lint Filter and inner surface of Loading
door")
C
Drain the water tank after each drying
cycle. (See "Draining the water tank")
57 / 64 EN