Electrical Connection; Transportation Of The Product - Beko DPU 8306 GXE Bedienungsanleitung

Installation

3.7 Electrical connection

Connect the product to a grounded outlet
protected by a fuse complying with the values in
the "Technical specifications" table. Our company
shall not be liable for any damages that will arise
when the product is used without grounding in
accordance with the local regulations.
Connection must comply with national
ƒ
regulations.
Power cable plug must be within easy reach
ƒ
after installation.
ƒ The voltage and allowed fuse or breaker
protection are specified in the "Technical
specifications" section. If the current of the
fuse is less than 10 Amperes, please have a
qualified electrician install a 10 Ampere fuse.
ƒ The specified voltage must be equal to your
mains voltage.
Do not make connections via extension cables
ƒ
or multi-plugs.
The main fuse and switches must have a
ƒ
contact distance of minimum 3 mm.
B
CAUTION: If the product is faulty, it must
not be operated unless it is repaired!
There is the risk of electric shock!

3.8 Transportation of the product

1. Unplug the product before transporting it.
2. Remove the water drain (if any) and chimney
connections.
3. Drain the water in the product completely.
A
CAUTION: We recommend carrying
the product in upright position. If it is
not possible to carry the machine in the
upright position, we recommend carrying
it by tilting towards the right side when
looked from the front. After the product is
moved to its new place, wait for 12 hours
before starting it.
Dryer / User Manual
45 / 64 EN