Klarstein Skytower 360 Smart Bedienungsanleitung Seite 37

Cleaning the water tank
• Pull the mains plug out of the socket. Turn the winding frame knob to the horizontal
position and pull the water tank halfway out.
• Put your hand into the water tank, rotate the fixing buckle 90°, and then push the
water pump box assembly down to take it out, and finally take out the water tank.
• Remove limescale residues in the water tank with a damp cloth soaked in neutral
detergent. Then rinse the water tank with clear water.
Cleaning the surface
• Before cleaning the appliance housing, make sure that the appliance is switched off
and the mains plug has been removed from the socket.
• Wipe the surface with a damp cloth. Do not rinse it directly with water.
• Do not use aggressive or abrasive cleaning agents.
Storage
• If the appliance will not be used for a long time, unplug it from the mains and pack
it away to prevent dust from getting into the housing.
• Before storing the appliance, make sure that it is clean, the filter is dry and that there
is no water in the water tank.
• After packing, store it in a dry, ventilated place.
EN
37