Safety Regulations; Layout And Items Supplied; Proper Use - EINHELL TC-WD 200/150 Originalbetriebsanleitung

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool. Failure to adhere to the
following instructions may result in electric shock,
fi re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.

2. Layout and items supplied

2.1 Layout (Fig. 1/2a-2c)
1. On/Off switch
2. Safety glass
3. Spark defl ector
4. Cover
5. Dry grinding wheel
6. Wet grinding wheel
7. Workpiece support
8. Mounting holes
9. Base plate
10. Water container
11. Socket head screw
12. Washer (small)
13. Spring washer (small)
14. Nut
15. Lock bolt (long)
16. Locking knob (small)
17. Lock bolt (short)
18. Washer (large)
19. Spring washer (large)
20. Locking knob (large)
21. Sealing plug
Anl_TC_WD_200_150_SPK9.indb 20 Anl_TC_WD_200_150_SPK9.indb 20
GB
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Wet-dry grinder
•
Safety glass
•
Spark deflector
•
Workpiece support
•
Socket head screw (2x)
•
Washer (small) (3x)
•
Spring washer (small) (3x)
•
Nut (2x)
•
Lock bolt (long)
•
Locking knob (small)
•
Lock bolt (short)
•
Washer (large)
•
Spring washer (large)
•
Locking knob (large)
•
Sealing plug
•
Original operating instructions
•
Safety information

3. Proper use

The wet-dry grinder is a combination tool for the
coarse and fi ne grinding of metals, plastics and
other materials using the appropriate grinding
wheels.
- 20 -
23.06.2020 15:30:18 23.06.2020 15:30:18