Maintenance And Cleaning - Blumfeldt Gold Bar 2000 Bedienungsanleitung

EN
16
Remote Control
1 Power indicator
When in use, press any but-
ton, the red indicator will
flash.
2 On / Off
Switches the heater to on/
off/ standby.
3 First gear
Select to choose low heating.
4 Second gear
Select to choose moderate
heating.
5 Third gear
Select to choose high heat-
ing.

MAINTENANCE AND CLEANING

Maintenance
Careful and regular maintenance of Infrared Heater is required to attain a
long and efficient operation of your appliance
• Check the cleanliness of the Reflector and IR-Filament at least
once a month. If necessary, apply cleaning and maintenance
instructions.
• The number of checks may be increased considering the amount of
dust in the environment.
• Check the deformation of the Reflector, Wire and Frame visually
while cleaning the appliance. In case of any deformation, consult a
qualified technician.
• Check the power cable and plug visually while cleaning the
appliance. In case of any deformation, consult a qualified
technician.
• It is recommended to change the reflector every 2 years for more
efficient operation.