Atag DW7113XA Gebrauchsanweisung Seite 152

Settings
Table continued from last page
Settings
8. Water hardness
Exit
22
Options
0/1/2/3/4/5/6/7/8/9 Adjusting the water softener. Select a setting
depending on the hardness of the water supply. It
is important that this setting is correct!
German water French water
hardness hardness
scale scale
0-5°dH 0-9°fH
6-8°dH 10-14°fH
9-11°dH 15-20°fH
12-14°dH 21-25°fH
15-19°dH 26-34°fH
22-24°dH 35-43°fH
25-29°dH 44-52°fH
30-39°dH 53-70°fH
40-49°dH 71-88°fH
50°dH 89°fH
Do not forget to put salt in the salt compartment
after you have set the water softener to 1 - 9.
For a water supply with a hardness under 6°dH
(9°fH), select 0. The water softener is deactivated
and no salt is needed.
To exit the dishwasher's Settings menu, select Exit
and confirm your selection with the mode selector
.
Recommended
setting
0
1
2
3
4
5
6
7
8
9