The Main Power Switch; Select Program - Atag DW7113XA Gebrauchsanweisung

Open the door and press the main power switch.

The main power switch

Open the door and press the main power switch. Also turn on the water tap if it is turned off.

Select program

Eco is always pre-selected. To select another program, press the navigation button
desired program is shown on the display.
Select a program to suit the type of dishes and how dirty they are.
Eco
This program is suitable for washing normally dirty dishes and is the most effective program in terms
of combined energy and water consumption. This program is used to assess compliance with EU
legislation on ecodesign.
You can read more about greener dishwashing in the chapter Greener dishwashing.
Universal
An effective program for daily use for slightly dried leftovers. (This program is not intended for burnt
food, such as on oven dishes.)
Time program
The program adapts to the specified running time or finish time. With this program it is important to
choose a time suited to how dirty the dishes are.
0:15-0:45
1:00-1:30
2:00-2:30
Press the option button to set the desired program time.
Rinse & hold
Used to rinse dishes while you wait for the dishwasher to become fully loaded.
Select program Select program mode
Slightly dirty dishes
Normally dirty dishes
Very dirty dishes
Using the dishwasher
Starting the dishwasher
Select option
until the
15