Closing The Door; Technical Data; Product Information Sheet - Zanussi ZQA14030DA Benutzerinformation

It is strongly recommended to use
original spare parts only.
Use LED bulbs (E14 base) only. The
maximum power is shown on the lamp
unit.
CAUTION! Disconnect the plug from
the mains socket.
1. Using a screwdriver, remove the screw from
the lamp cover.
2. Detach the lamp cover in the direction of the
arrows.

TECHNICAL DATA

PRODUCT INFORMATION SHEET

Trade Mark
Model
Category
Energy efficiency class
Energy consumption in kWh per year, based on standard
test results for 24 hours. The actual energy consumption
will depend on how the appliance is used and where it is
located
Storage volume in litres, Fridge
Storage volume in litres, Star
Storage volume in litres, Cellar zone
Storage volume in litres, Wine
Storage volume in litres, Total
Storage volume in litres, Freezer
Storage volume in litres, Chiller
Storage volume in litres, Other compartments
10
All manuals and user guides at all-guides.com
3. Replace the lamp with the one that has
identical characteristics and is specifically
designed for household appliances.
4. Reassemble the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door.
Make sure that the light switches on.

CLOSING THE DOOR

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to assembly
instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
Zanussi
ZQA14030DA 933024031
1. Refrigerator with one or more fresh-
food storage compartments
A+
117
133
-
-
-
133
-
-
-