Operation; Basic Settings - elv WS 3001 Bedienungsanleitung

3. Operation

After the commissioning of the basic device and the subsequent installation of the
radio sensors the transmitted and converted data appears in the appropriate dis-
play fields of the display. If the displays do not appear you will find information on
fixing faults in section 7.
Ensure that the only data that can be displayed is that for which the appropri-
ate sensors have been installed. There can be no display of rainfall without a
rain sensor, for example.
As all relevant data appears in the screen concurrently, operation is essen-
tially restricted to the simple selection of further sensors or weather data by
gently touching the appropriate display field.

3.1. Basic settings

The weather station is delivered in a condition that allows you to use it immediately
after commissioning without further adjustment. Normally the data for the indoor
sensor is displayed at the top left of the display and the data for the outdoor sensor
1 at the right.
The main display windows of the weather sta-
tion, above without and below with brightness
sensor
If necessary, for example, for a very tight installation at strictly prescribed locations, the display unit can be easily
rotated by 180 degrees. For details contact our service department.
60